Productos
Wifi IoT Relay Board Based on ESP8266
Módulo IoT de 2 relés con WiFi, basado en ESP8266. Incluye gabinete plástico. Alimentación 85 a 265 VCA (soporta 110 y 220 VCA).
COD: TRONWI1072
Peso: 0.010 Kg
Disponibilidad: En Stock
ARS 17361.00
El producto no está disponible para la venta en este momento
Características
Product Description
The purpose of this design is for learning how to play with the hardware and software of a IOT project, it is based on price competitive wifi module ESP8266.
Hardware Features
- Based on ESP-12F ESP8266 Wifi Board
- This relay board use one AC input, and supports two relay AC output. Please note the output AC power comes/connected from/with input AC power. Relay only play as on/off switch for AC power. Will be danergerous to use in any other cases.
- Use mature AC-DC power module, input volatge 85 – 265VAC
-
Relay Specification:
- HF46F-5-HS1, 5A250VAC, 5A/30VDC
- Plastic enclosure design support, package includes the PCB board, plastic case, and self-drilled screws (screws are not assembled). Case general dimension is 111*42 mm.
- Two Lead out buttons BTN1 and BTN2
- Two relay indication LEDs
- One status LED, indicating connecting status in demo code
- A few lead out pins, from top (left) to bottom (right):
- Resevered design for temperature sensor DHT22
- Screw terminal which are easy for wiring output.
Demo Software Features
- Programming skills need, not recommended for unfamiliar user.
- The board flashed with demo test code, you can follow the youtube video to make a try directly. And find demo code in the wiki page below. Only nodemcu demo code avaialble.
-
The demo code written in R1.1 will do:
- switch both relay on/off once per second, and wait for smart config
- When connected to local wifi by smart config, on/off switching relay will stop and you can use mqtt to control it, follow wiki instruction for further details.
- You can use USB-TTL debug to re-program it.
- If you want to customize it, please contact via info@electrodragon.com
- Use MQTT platform called www.cloudmqtt.com, use-friendly for esp8266
- Based on NodeMCU LUA coding
- Demo code available, open source, and support smartconfig and MQTT, please find the code below or at our dropbox page to download
Note:
- The board has exposed high voltage AC connection, be very carefully on this.
- Please notice the two relay output terminals are a little conflict with case, second channels need to use soft wires or remove the screw installation bars manually.