Productos
MQ2 Smoke Detector Shield for Arduino
Shield Arduino para sensado de gas inflamable o humo, con salida analógica.
COD: LS101101010
Peso: 0.010 Kg
Disponibilidad: Sin Stock
ARS 16843.00
El producto no está disponible para la venta en este momento
Características
Product Description
MQ2 flammable gas and smoke sensor detects the concentrations of combustible gas in the air and ouputs its reading as an analog voltage. The sensor can measure concentrations of flammable gas of 300 to 10,000 ppm.The sensor can operate at temperatures from -20 to 50°C and consumes less than 150 mA at 5 V.
Connecting five volts across the heating (H) pins keeps the sensor hot enough to function correctly. Connecting five volts at either the A or B pins causes the sensor to emit an analog voltage on the other pins. A resistive load between the output pins and ground sets the sensitivity of the detector. Please note that the picture in the datasheet for the top configuration is wrong. Both configurations have the same pinout consistent with the bottom configuration.The resistive load should be calibrated for your particular application using the equations in the datasheet, but a good starting value for the resistor is 20 kΩ.
MQ2 Sensor datasheet (180 Kb)
